Water Proofing Treatment For Roof
In this civil engineering video tutorial, you will learn how to apply damp proof water proofing solution on the roof and ceiling to get rid of leakage problem and resist the penetration of heat from the roof to the room. It also reduces the heat up to 10% and cools the temperature of the room.
Given below, the step-by-step guidelines to use the water proofing solution :-
Initially, it is required to mix 10 liters of solution to 2 to 2.5 liters of water in a bucket and fill the half portion of the bucket with capacity 20 liters. For 20 liters solution, 4.5 liters water can be added and for 10 k. It is suggested not to use excessive water as it can reduce the density of the solution.
Then with the help of a iron brush, clean the iron & other impurities from all the sides and areas of the terrace so that the solution can be perfectly mixed with the terrace. Then clear the other leftovers with the broom. Check properly that the roof does not contain any type of soils otherwise the quality of solution becomes weak. Then cleanse the entire roof with water.
Now, use a brush to apply the first coat of solution to the entire roof. Then apply second and third coat without mixing any water to the solution. After applying the third and final coat, the whiteness of solution will be increased. It is recommended to smart care damp proof water proofing solution for this purpose.
SmartCare Damp Proof belongs to a fiber reinforced elastomeric liquid applied water proofing membrane. It is formed with select elastomeric and resilient acrylic polymers and reinforcing polyester fibers. After curing, it develops a solid, seamless, hard-wearing membrane that is useful for good waterproofing.
For online demonstration of the process, go through the following video presentation.